Lan Topologies

LAN Topologies IT240 10/14/12 1. Case jump 2-1 With a net profit of 50 computers I will use the promise topographic anatomy to upgrade this network. With this type of analysis situs all the devices are connecting in a loop form and the instruction travels in one direction, thereof turn awaying collisions. Here the cabling doesnt terminate, it continually goes from one device to another coin bank it gets back to the true device. It is also easier to manage the network since all the information is passed around the ring in the same direction. . Case project 2-2 With that many an(prenominal) computer and four servers, I will use an Extended star Topology. As pointed out in the case project that there are a few thumbes available here, I will use a central switch and connect the rest of the available switches to it and connect the cc PCs to those switches. Switches are good for determining each single(a) packets destination and ensuring that they are delivered to the right d evice.Note Even though they might have two different uses in some cases, the hubs in my diagram represent the switches. 3. Case project 2-3 * Physical versus logical analysis situs A physical topology defines how the devices on a particular network are physically machine-accessible logical on the contrast tells us how the systems on the physical topology communicate. * Bus Topology In this topology all the devices are physical chained to one another by means of a single cabling system.This form of topology works better when the song of computers on the network are limited. * Star Topology This is the form of topology where all devices connect to central unit through a hub, switch or even a router. One of the biggest advantages here is in the concomitant one of the devises failed, it does not bring the entire network down. * Ring Topology In this form of topology all the devices are directly connected to the next existing device in a ring form.This benign of works like the bus topology, however, there is no termination here, as the devices connect from one to another all the way back to the original device. * Ethernet and CSMA/CD This is the type of technology networks use to sense if there is an ongoing transmission. In the event where there is one, the system goes into wait mode money box the channel is free for it to begin its own transmission. This is one of the ways to avoid collision.